Gateway Candle Mold

This is a candle mold for a Starlink gateway visible in sites around the world. I made it based on photos from them on trucks and adjusted to make it more moldable. 

I've left the dimensions to be the full size version so you can shrink it down however small you want. I guesstimated the real size of the gateway. More pictures are here:
 

https://www.starlinkinternet.info/community-gateway

My sphere parts were about 3cm in diameter.

Here's the process to making these: 

1. Cut your wick and put it in the center of the mold halves.
2. Fasten the halves together using more wick or M4 bolts.
3. Heat wax until liquid
4. Pour wax into bottom of open mold and leave for at least 20 minutes
5. Open molds carefully