December 3, 2019
Description
I needed a battery holder. One that doesn't have extra bits added onto it.
Also, it had to have the cut-outs for a standard battery spring and clip setup.
And I couldn't find one! So I modified Chrismettal's design to ditch the charging portion and add in some thicker walls to hold the battery in place.
According to the original designer it uses 10mm x 10mm battery plates. I'll post images as soon as it's done.
I've also got my own design for an 18650 battery holder. But since this one had the slots already cut I decided to go with it.
Enjoy!
Find more of my work at https://pcburn.com
Category: Electronics
License:
Creative Commons — Attribution — Share Alike
8
Inhibit
