Prusa i3 MK3S Corner ENCLOSURE - Ikea LACK table

Just my design of a IPrusa i3 MK3S Corner ENCLOSURE - Ikea LACK table from the 4mm plexiglass.

It is not a tightly closed cabinet. There is a small gap about 2.5mm between plexi and LACK table.

Video instructions can be found on youtube: https://youtu.be/S5HYBOylQ7I

What you'll need:

Print :

1x Prusa_Enclosure_Top_Corners

1x Prusa_Enclosure_Bottom_Corners

1x Prusa_Enclosure_Top_Internal_Reductions.stl

2x Prusa_Enclosure_Door_strip

1x Prusa_Enclosure_magnet_holder_and_handle

1x Prusa_Enclosure_Filament_guide

2x Ikea_TopSpoolHolder

Plexiglass dimensions:

2pcs: 438 x 488 mm, thickness 4mm

White Lacquered MDF Board (or Standard Hardboard) dimensions:

2pcs: 443 x 447 mm, thickness 3mm

Neodyme Magnets:

4pcs: N52 (or N38) disk 8x3mm

4pcs: N52 (or N38) disk 8x2mm

Screws and Nuts:

6pcs : Original Ikea Lack screw

3pcs: 8mm / M8 x 30 Wood to Metal Screw

3pcs: 8mm / M8 x 20 Wood to Metal Screw

3pcs: M8 x 30 Long Rod Nut

12pcs: M3 x 6

1pcs: 6.1mm X 14.5mm System Screw (#7 x 14.5mm Deep Thread System Euro Screws)

1pcs: 5mm x 10mm System Screw

Other:

10mm aluminium rod

Tools :

2.7mm, 4mm, 6mm, 8mm, 9mm, 10mm drill

15mm forstner drill bit

Philips screwdriver

Torx screwdriver

Wrench 13mm

3D printed drill jig for embedding magnets (file Prusa_Enclosure_magnet_holder_drill_jig)

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: Filament PM PLA White

Category: 3D Printer Accessories