Sink Drain Blaster

Use water pressure to help clear out your bathroom sink drain.

In addition to a hose with an 8mm OD and a 6mm ID; you'll need to print the seal in TPU, but the other parts can be printed in your go-to filament. 

I've included 2 different versions.  The files ending with “- OD” are the ones I recommend, as they offer the highest water flow rate, but they are quite difficult to insert the 8mm hose into.

To use, simply unscrew the aerator from your Moen faucet and install the adapter, place the Drain Blaster cap with its TPU seal over the open sink drain and turn on the tap.

The first of the two videos shows the flow from the “- OD” model.