Coffee coaster

Coaster diameter 100mm.

Material PLA (for hot drink cups use PET-G filament)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.  You may print at higher layer heights below the Min Depth of 0.72mm. The Max Depth is 2.3mm and the Actual Depth is 2.3mm.

It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.

PLA Anycubic Black Transmission Distance: 0.3
    PLA Bambulab Basic Brown Transmission Distance: 2
    PLA Elegoo Basic White Transmission Distance: 7
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #16 (1.36mm) swap to Brown
    At layer #19 (1.6mm) swap to White for the rest.