June 14, 2025
Description
Simple keyboard cover for the Commodore C64. The cover fits snuggly over the keyboard only and does not cover the entire case.
Has a similar styling to the C64 case with the lines and logo at the top.
The cover is fully cut-out to save on materials but is still sturdy enough not to flex or break easily. I've also given it enough clearance for the different keyboard types with newer models being higher than the original.
You will need a large bed printer for this, minimum 370mm in one axis, I've used a Kobra 3 Max.
License:
Creative Commons — Attribution — Noncommercial
TomDD
