June 14, 2025
Description
This is a remix that makes it so there is No Glue needed to hold the Heltec V3 in place. It also now holds a 3,000mAh battery snug and resizes the Battery/GPS Spacer to hold the GPS Module better and fill in the area.
GPS used is the GY-NEO6MV2 NEO-6M GPS Module
Connect GPS TX to Pin 45
VCC to 3.3V Pin
Ground to Ground Pin
GPS RX cable is not required.
On the Meshtastic App under “Position” set GPS RX Pin to 45. (GPS TX from GPS goes to GPS RX on Heltec V3)
A version with a better locking lid is in the works…
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
The Typical Ham
