American Dad - Roger the Alien - magnet or keychain

Simple but very nice print, 2 or 4 colors.

Roger is light grey, but I printed in white (grey filament missing)

Glue a magnet on his back or attach a keychain and enjoy!

For the dual color version you must slice, add a pause and start the print in white or grey. When the printer stops, change the filament color in black

f you want to print the multicolor with a mono extruder you can follow this guide:

-----------------------------------

HOW PRINT IN MULTICOLOR WITHOUT MMU:

1. Printer Settings → GENERAL → EXTRUDER
2. add 1 extruder for each color, in this case 4 extruders (black, white, orange, blue)
3. assign a color for each extruder
4. go to Pinter Settings → Custom Gcode → Gcode tool change and add this lines:

; START_CUSTOM_TOOL_CHANGE LAYER
[layer_z] / [layer_num]
{if layer_num >= 0} M600{endif}
; END_CUSTOM_TOOL_CHANGE

5. go to PRINT SETTINGS → MULTIPLE EXTRUDER → CLEANING TOWER

6. Enable the purge tower

7. import the first item, the white base

8. on the white base ites, right click, then choose ADD MODIFIER and select LOAD. now pick one color and repeat the same procedure for all the colors.

9. Assign the right color for each part. Look at the right part of the screen, you will see the part name and a little box with the part color. change it to the color you need to print.

now slice and see it everything is ok, then print. The printer will stop for color change, so be prepared to change it a lot of times….