Hooks for mounting a privacy screen

These are hooks for attaching a privacy screen to a balcony railing using 16mm grommets. I recommend using ASA, PA12-CF or any other UV resistant filament for printing. There are larger and smaller hooks, for my railing they can be used on the upper and lower side. You could also just use the upper hooks and fix the privacy screen with cable ties on the bottom side.

Prints without support (see orientation in the .3mf file). Use at least 3 perimeters and 15% gyroid infill.

If you're wondering: the pink one is only a prototype. I used it for testing before printing a compete printbed full of 32 hooks. But now that I have it, I might as well keep it… ;-)