Simple Traffic Cone - MM or Single Colour

A simple traffic cone.

A model I made for a fun project, originally destined to be a GPU anti-sag device. 

Kids took one look and it's been mass-produced for hotwheels !

The original model had a decent wall thickness so it scales down well, i have successfully printed them scaled at 50% in every direction, and even some stout ones scaled a further 20% or so in the Z direction.

Easy to print in multiple materials with a single extruder, just configure your slicer to use a pause or tool change. 

Grab the .stl for single colour, or the .3mf if planning to use multiple colours.

Thanks!