Toolless motherboard standoffs with clip-on retaining washers

ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components.

I made these standoffs while designing a 10 inch rack mountable ITX chassis. They proved to work really well on their own so I'm uploading the standoffs as a separate model.

The clip-ons fit snugly on motherboards with 1.6mm thickness, which should fit most *TX motherboards. If your motherboard is of a different thickness you can still use the standoffs, but the retaining washer might not latch on properly. Let me know if I should add more models for different thicknesses.

Printed at 0.2mm layer height, 3 walls and 20% infill (or more). PLA works fine.