June 15, 2025
Description
Fills in the unsightly gaps, hides cables and generally tidies up the look of this case when using an SFX-L PSU.
Print face-down with no supports required (you might want to use a brim to prevent warping). Photos show prints done on 0.6mm nozzle, 0.3mm layer height, Eryone PETG-CF.
Installation in the case is easy: simply push to fit.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
ᴄᴉᴚᴋᴉᴉᴛ
