Y axis mount for 48 mm stepper for SV06

I used this stepper: https://www.omc-stepperonline.com/de/e-serie-nema-17-bipolar-59ncm-84oz-in-2a-42x48mm-4draehte-w-1m-kabel-verbinder-17he19-2004s but any other of the same size should also be good. You need 3X (16-20mm) M4 screws and 4 NUTS + the M3 screws of the original mount. There is an optional screw needed (around 10mm) M4 that screws into the printed part itself (you may be able to use a heat insert instead, but I didn't have any laying around). You also need to rotate the GT2 pulley by 180 deg to make the belt go straight ! MAKE SURE TO USE AT LEAST PETG, ASA OR ABS TO AVOID WARPING 

PRINT WITH NO LESS THAN 4 PERIMETERS