Ventilation Port Light Trap V2

A printable Ventilation-Insert for Plant Tents or Grow Boxes - In Version 2 it's easier to print.

Height: 30 mm

Diameter: 150 mm

Overhangs less steep than 45 Degrees

Spacings available: 2.4 mm, 3.0 mm

First and last Fins are, longer than in between.

Still this is NOT a fast Print, it needs quite a lot of time, because we need to be sure that no light can pass.

Recommended Print-Settings:

Black Filament as it reflects less light, also if available, Matt Filament

Classic Wall generator

0.2 - 0.24 Layer height

2 Wall loops.

Depending on your printer, you can save Time by deactivating slow down for Overhangs (As they all are less steep than 45 Degrees, this should be no Problem)

If you require different dimensions, just write a Comment please, I would create the file in different Sizes.

p.S. : The old Model: https://www.printables.com/model/827638-light-trap-vent-150mm-plant-tents