June 17, 2025
Description
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Tree supports (at least 25°), block supports inside the mouth, keep only the teeth supported!
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-insert-scalable
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives