Gate, 32mm scale, Supportless (DND / TTRPG)

A premium version of this model available for $5 CAD on Cults3d - a coupon code is available on my Patreon: https://cults3d.com/en/3d-model/architecture/fortified-gate-tsolenka-pass-supportless

I spent some time yesterday putting together a version of the Tsolenka Pass Gate from Curse of Strahd. I tried to keep it similar to the style shown in the book. This is <50% of the actual scale tho so I've labelled it "Mini" but the doorway will fit a standard 32mm character passing through. For printing it shouldn't need supports at 0.2mm on a 0.4mm nozzle and 5% infill. Including a brim is ok here since it's easy to clean up and helps with adhesion. It should use about 70g of filament and my slicer says it'll take about 3hrs 30 minutes to print.

This model is usable for any Gate within Barovia or other TTRPG campaigns. You could scale it up as well depending on how much space is on your print bed.

I have the full scale version test printing now which splits the sides and center into separate parts, dowels to help position the separate parts, adds a portculis (+ a latch to lock or drop it), spots for wiring in the doorway LED lights, dowel-able decor (spikes or gargoyles or w/e). I'll post this improved version for free on my Patreon, some other places and paid copies on Cults3d for a small fee.

I'm on a quest to make 1000 free DND/TTRPG miniatures. This is model #536.

See my other models and progress on Patreon: https://www.patreon.com/c/Adamnant

Category: Games