CORE One 2kg Twist Adjustable Spool Holder

Similar to the HT90 Spool Holder, this spool holder twists to extend or shrink to adapt to different spools.

Very Simple little replacement base to mount the Twisting Spool holder to the CORE One.

Original File (And spot to get the spool holder itself outside of the STEP file)

Installation Instructions;

1. Remove the CORE One Spool Holder
2. Place the M6 Tee Nut in the base of the mount
3. Put the assembly together like shown in the CAD
4. Thread the M6x75 bolt through the Center Piece
5. Press the Base Plate to the mating surface of the Center Piece
6. Thread the M6x75 bolt into the Tee Nut in the Base Plate
7. Attach the Baseplate and the rest of the spool holder assembly to the CORE One using the 4x M3 Torx Screws you removed in step 1.

BOM: 
1x M6x75
1x M6 Tee Nut