Dictum block plane mount for Multiboard

Description

Trying to organise my tools better. For my handplanes i wanted to use my multiboard as a plane till. This mount is for the Dictum low angle block plane. I think the castings of the following planes should also be the same:

Luban, Juuma, Woodriver, Quangsheng

I used a rough mock-up of the block plane and uploaded it here. Worked out surprisingly well.
However, that's just a guess, as I don't own them myself yet.

The holder is inspired by this design for the Lie-Nielsen No 60-½ block plane.

Assembly

Screw the ‘Multiconnector’ into the Multiboard. The ‘Flush Large Thread’  is inserted into the opening above it. The mount is now placed on the ‘Multiconnector’ and secured with the ‘Mid Thread T-Bolt’ to prevent it from being pulled upwards. Ideally tighten the T-Bolt with pliers, to prevent movement.

Can also be mounted sideways.