Heatset Insert Tip Storage 3D Printer File Image 1

Heatset Insert Tip Storage 3D Printer File Image 2

Heatset Insert Tip Storage 3D Printer File Image 3

Heatset Insert Tip Storage 3D Printer File Image 4

Heatset Insert Tip Storage 3D Printer File Thumbnail 1

Heatset Insert Tip Storage 3D Printer File Thumbnail 2

Heatset Insert Tip Storage

DominicFdouse

Description Comments Tags

Description

Printing Instructions

Filiment

Material Advised

PETG/PET/ASA

Material Propaties Required

Propperty	Type
Constancy	Hard
Durablity	Not brittle but doesnt need to be up to much though it should survive single layer bending
Sun Bleaching Protection	depends on use case but would advise for long term use so PLA not advisable

Slicing

Property	Information
Print Direction	See Sliced Model
Infill	5%
Supports	Not Required
Print To Pause for Magnets	One layer before bridging over holles starts
Nozzle Size	0.4 (0.6 should be fine too)

Aditional Parts

Part	Quantiy
M4 threaded insert	2

Overview

This is a simple modification of iconic FAB's design that solved the problem of were to put the tips associated with the press that had to go somewere or roll of in to oblivion