Menstrual product dispenser

🩸 Dispenser for menstrual products

This is a dispenser for both pads and tampons ("normal" size). There are two holes in the back to mount it to the wall. This ran through several design changes and worked well for me and friends for several months now. 

The walls are quite thin to save on material, but held up no problem so far.

There are openings to reach the pads and tampons easily even if they should get stuck somewhere.

🩸 Print settings

Lid needs no supports. Make sure the top of the lid is on the build plate (should be the case when you load it into your slicer)

Dispenser needs support on the top side of the opening (view image for reference).

Do not scale the print otherwise the products won't fit.

Depicted print, printed with PLA at 0.2 mm layer height and 10 % gyroid infill.

If dispenser and lid looks too small scale to 1000 %

Created in Tinkercad.

Happy Printing! 🖤