February 24, 2026
Description
Would you like to support my work? :)
Check out my full catalog with exclusives, early access and commercial licences.
—
A creative hanging planter for your home or garden.
What you need:
The 3d printed thing
Yarn with about 3mm in diameter (can be flax, hemp, whatever)
The assembly instructions are in the images.
Size: 90 × 80 × 170 mm
Print settings
Required build volume: 90 x 90 x 180 mm
Material usage: 110g
Print time: 10h
Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: brim
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
License:
Standard Digital File License
Gazzaladra
