February 12, 2022
Description
While I agree with RGN01 that tuning your printer to be able to make good supports is a good and proper thing I also lived for a long time without the ability to print supports so I totally agree with Dapug that printing without them has its benefits as well.
Here's a simple remix that fills in the holes and makes it a little more substantial which is good if your not mounting it and easier to print in either case.
Printer Brand:
Dremel Digilab
Printer:
3D20
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
10%
Filament: generic pla white
Notes:
A couple of shells and 10% should be plenty maybe a little more infill if you want it to have a little extra weight if you aren't mounting it to the wall.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Archie
