Extraction kit from K1(C) to window

Simple design to allow the vent at the back of the K1(C) to vent to an open window using 100mm standard ducting.

The connection to the K1(C) fits over the top of the original carbon filter and designed to give as much room behind the printer for the ventilation ducting.

Support over the top of the workbench was made specifically for the DeWalt table in the picture. Should be easy to modify for other installations. No need for any zip ties / tie wraps as the gap in the support is large enough to insert the ducting.

The window side is fixed to the mushroom strike / keep with a flexible tab at the bottom to allow a good fit whilst also being readily removed. I'm not sure how standard the size is, please check ahead of printing.

If you've found this model useful, please consider buying me a Ko-Fi coffee.