June 21, 2025
Description
Einhell Power X-Change battery holder.
The model was designed with an emphasis on simple and fast printing - the printing time does not take more than 4 hours.
For fix use 2 wood screw with diameter 3.5 - 4 mm
Printing without supports, 53grams of filaments.
Tested with battery: 2,5Ah; 4,0Ah
Držák baterie nářadí Einhell Power X-Change.
Model byl navržen s důrazem na jednoduchý a rychlý tisk - doba tisku nezabere více než 4 hod.
Pro montáž použijte 2x vrut do dřeva průměr 3,5 - 4mm.
Tisk bez supportů, 53gramů filamentu.
Testováno s baterií: 2,5Ah; 4,0Ah
Material: PETG
Layer: 0.15mm
Perimeters: 4
Solid layers - top: 5
Solid layers - bottom: 5
Infill: 100%
Supports: no supports
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
ZikmundWORKS
