Camera Arm for Xiao ESP32S3 Sense & MK4

A simple camera arm for the Xiao ESP32S3 Sense and Prusa MK4.

Used @brunnair's excellent case: https://www.printables.com/model/1043703-camera-case-xiao-esp32s3-sense

And a Spring Loaded Drop in M4 T-nut M4nEs: https://www.printables.com/model/891014-spring-loaded-drop-in-m4-t-nut-m4nes 

I've used a 24v USB adapter wired onto the PSU to the camera turns on with the printer, and routed the power cable underneath using the stock route. 

There is a space for a m2 threaded insert, the idea being that would allow you to adjust the camera angle and lock it in place, but I found the fit tight enough that I didn't need it.