Fujitsu E400 PSU to ATX Power Supply Bracket / Adapter

• This bracket allows you to use the power supply out of a Fujitsu Esprimo E400 computer in a case which takes a standard ATX one. 

• Despite its strange dimensions, its outputs conform to the ATX standard.
  
   

• You'll need 7 screws; 4 to mount the bracket and 3 to mount the PSU to the bracket. 

• I also used a long standoff, spare from another project, to support the PSU as it sags otherwise. It's optional but recommended.
  
   

• Made in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.

Why did I design this? I got 3 of these PCs from a dental practice which was throwing them out. One had a water damaged motherboard so I scrapped the case, sold the HDD, re-used the RAM, CPU, heatsink, etc and was left with a spare PSU. Why not re-use it?

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.