Cow in Space 3D Picure

You can use as much colors as you want and switch at the layer you want, but here are my print settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Start with Black
At layer #4 (0.4mm) swap to Brown
At layer #6 (0.56mm) swap to Grey
At layer #14 (1.2mm) swap to White for the rest

Remember that these instructions change if you make the model bigger or smaller

You can also use the 3MF and you will have my color changes. (for BambuStudio; idk if it works with other slicers)