February 13, 2022
Description
This thing is inspired by the Lulzbot Taz Enclosure by MrMcGuire. I am using this enclosure design for my Prusa Mini+ with the base. I used 400x400mm acrylic glass & needed some feet, as i wanted to access the printers storage space below. So i designed these feet fitting directly to the enclosure corners.
The original enclosure design files can be found at MrMcGuires' thing page : http://www.thingiverse.com/thing:675652
please look at the remixes section, as there are some useful updates:
https://www.thingiverse.com/thing:746922
https://www.thingiverse.com/thing:716745
The handle on the pictures is the following thing:
https://www.thingiverse.com/thing:4619895
16 M5 16mm screws with the fitting M5 nuts to secure them.
License:
Creative Commons — Attribution — Noncommercial
7
sehe
