Airless Basketball - FiberFlex 30D

Please read this before downloading/printing!

This is our new airless basketball model made for the Fiberology FiberFlex 30D filament. This filament has the best bounce and durability out of all of the airless basketballs/airless basketball filaments we have tested (so far). The big pros to using this filament are 1) best bounce and durability we have tested, 2) very affordable considering the bounce you get, and 3) it was relatively easy to print with.

There are some definite cons to using this filament – 1) the filament is REALLY squishy, which helps maintain durability, but makes it feel less like a real basketball, 2) each basketball I have printed has had a small “dead spot” (a spot on the ball that does not bounce as good as the rest). Using a 0.6mm nozzle seems to make it smaller, but I couldn’t print one without it, and 3) the recommended print speed is less than 35 mm/s, which means it takes a very long time to print a full-sized basketball.

I always recommend drying the filament for a few hours before printing with it (I usually dry at 50C for about 4 – 6 hours), and I always put a good layer of printer bed glue before printing for both adhesion and as a release agent when the print is done. I will list the printer settings and helpful links below:

Printer Settings:

Printer used: Bambu Lab P1S
Slicer: Bambu Studio
Nozzle Size: 0.6mm
Nozzle Temperature: 225C
Bed Temperature: 55C
Layer Height: 0.3mm
Z-seam position: Random
Wall/perimeters: 4 on sides/bottom, 6 for top
Infill: 50% Gyroid
Printing Speed: 25 mm/s (bridges were 20 mm/s)
Supports: Tree slim, manually painted on bottom of ball
Supports Z-distance: 0.22mm

Helpful Links:

Link to the Fiberology Fiberflex 30D filament: https://tidd.ly/4kXxVH3

Link to printer bed glue stick: https://amzn.to/43iLAT8

Link to angle grinder/sanding disc: https://amzn.to/4cn09Wy

Link to the filament dryer: https://amzn.to/4dT1PbV

This design (like all Make It Lab designs) is under copyright. Which means, upon downloading, you do NOT have the right to sell commercially. The Digital files are never to be re-sold, shared, or given away! If you would like to legally sell them commercially, please subscribe to commercial tier in the Make It Lab Patreon here: https://www.patreon.com/MakeItLab.

Just an FYI, WE WILL CLAIM ALL LICENSE/COPYRIGHT VIOLATIONS. Also, we are releasing these models to the public for free for PERSONAL USE ONLY.

Links included in this description may be affiliate links and I may receive a small commission if you make a purchase. There is no additional charge but it does help to support my channel if you make a purchase.

Watch our YouTube video here: