FIFO Can dispenser for cans (Ø~99mm H~119mm 1kg 850ml 30 oz.)

Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max).

The files provided are only for the left side and need to be mirrored in the slicer for the other side.

Print settings: Infill=15% gyroid /Layer hight=0,2mm

Materials & Tools required: M5 Threaded rod / M5 Nuts / M5 Washers / Rubber mallet & a piece of wood (for precise hammering blows) / Knife or Sandpaper (for fit adjustment if necesery) / Some rubber feet

Assembly: Use a rubber mallet to gradually hammer the puzzel pieces together, note that the connection is designed to be a mostly 0 interference fit except for the inner and outer corners (Depending on your printer accuracy it may be necessary to sharpen these corners for a looser fit). Cut the M5 threaded rod to length and bolt the pices together.

It is possible to assemble multiple units as one pice using a longer M5 threaded rod that passes through all units.