Core One Nozzle Wiper - Wire Brush (Ed Remix)

I wanted to install the Core One Nozzle Wiper by PCR_178847 then remixed by Ed, while I don't have any of the silicon nozzle wipers available, I do have plenty of the wire brush heads that I use on my Vorons kicking around :)

You will need to use a 3mm heat insert to attach it to the buildplate as per the original design and I have included a small hole in the bottom for a 3mm heat insert in case the brush is a little loose.

You will need to increase the height for the scrub to approx. 8mm above the build plate (you can adjust the height by changing the Z figure e.g G0 X40  Y-14 Z8 (this number) F10000;)

Replace this line in your Start G-Code:

G29 P9 X208 Y-2.5 W32 H4

with 

;G29 P9 X208 Y-2.5 W32 H4 ; original nozzle cleaning method
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;

Copying and posting multiple times will enable more brushes like so:

G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;
G0 X76 Y-18 Z8 F10000;
G0 X40  Y-14 Z8 F10000;