Another Core One Nozzle Wiper

I know there are already many Core One Nozzle Wipers available.

Why another one?

I simply wanted one that was as inconspicuous as possible and, above all, did not hinder me when changing sheets.

I recommend printing with temperature-stable material.

You will also need Wipper Bambulab A1, 1 M3x10 screw + M3 nut.

Recommended layer height 0.15 without support, but brim or mouse ears may be necessary.

Replace the gcode in the printer start gcode  G29 P9 X208 Y-2.5 W32 H4 with this one.

;G29 P9 X208 Y-2.5 W32 H4
;G0 X42 Y40  Z1.5 F10000; open Vent Mod
G0 X42  Y-14 Z1.5 F10000;
G0 X79  Y-10 Z2.5 F10000;
G0 X42  Y-14 Z1.5 F10000;
G0 X79  Y-10 Z2.5 F10000;
G0 X42  Y-14 Z1.5 F10000;

If you are using Jürgen's mod for automatic opening of the ventilation , remove the Semoiklon in the second line.

 Please check the settings again using the menu on your printer.