Ground spike and screw mount for fountain solar panel

This is a mount for solar panels that has a box on the back that is ~25X35mm. There is both a ground spike and a mount for screwing into a wall, fence post etc.

For the screw mount you do not need to print the tube and ground spike.

Orient mounting clamp part 2 so that it prints vertically, you may need to use a brim if you do not have good bed adhesion. A brim is also recommended for the ground spike and tube.

The clamp parts are held together with an M4 screw and nut, and the clamp that goes on to the solar panel is clamped with and m3 screw.

Category: Household