Extended table-top mount racks for YAMSS (YET ANOTHER MODULAR STORAGE SYSTEM)

Hello!

I really like this system, however, it only has mounts to hang it from the top.

But why not mount it to the table? 

So, here you are. I made these with exact dimensions.

In the files you have mounting plates from three to eight boxes.

Version with 3 studs should print on any Creality-sized printer (220mm bed).

Version with 4 studs should print on any printer with the bed size of 256mm. For example, your Bambu Lab A1 should do it.

For the 4 stud variant I also included shortened version. While it won't fit the width perfectly, it should be compatible with 220mm beds.

All other variants come in two editions. One is for full-length as one piece. These should be stronger, but I don't think a lot of people have 400mm bed printers available.

The other variant is split (fun fact: with exactly the same dimensions dove tail mount as main system) to two pieces. Print both A and B parts and connect them afterwards. I would strongly advise to glue them together. 

For assembly you may need to hammer them in place, since I made tolerances as tight as possible.

Thanks for checking out!