June 16, 2026
Description
An easy-to-print WATERING CAN EXTENDER & SPRINKLER | diameter Ø ~27mm & 10 liter
Those watering roses/spray attachments were always too big for my needs, so I created this extender for more precise watering!
note: (Transparent) PETG ftw & put some tape around the watering-can-hole to secure the extender & make it more watertight! And if the holes are too squished on the buildplate, just widen them with e.g. a pinboard pin! There is also a little testpiece among the files for testing the diameter!
License:
Creative Commons — Attribution — Noncommercial
Print-Head
