MikroTik Logo Wall Lamp – Modular 3D Printed LED Light

Print Settings

Printer: Any FDM 3D printer
Material: PLA or PETG recommended (for better light diffusion)
Layer height: 0.2 mm
Infill: 10–20%
Supports: Not required (if parts are oriented correctly)
Nozzle: 0.4 mm

Tip: Print the diffusers (blends) with white or transparent filament for best light diffusion. The body can be any color.

Parts List

1x Main body
3x Diffuser/Blend

Assembly Instructions
Insert the 12V LED strip inside the main body.
Route the power cable through the designated hole/opening.
Snap or slide the three diffusers into place – they are designed for easy fit.
Mount the lamp on your wall using the built-in holes (double-sided tape or screws, depending on your surface).
Connect the LED strip to your 12V power supply.
Optional: Add a switch, dimmer, or smart controller for extra features.