Bracket for Expandable Sheet Holder Mini

About

I needed to store sheets in vertical position without screwing the rails to anything, so I created a bracket for the Expandable Sheet Holder Mini, so you can drill it further whatever you like, or glue it, use zip ties or velcro straps etc.

You can print it on the Mini if you place it diagonally - see .3mf/gcode. 

Changelog
- 2026.01.08 - added gcode/3mf just for time and material preview
- 2025.06.30 - initial release

Printing
- provided gcode is just for time and material estimations
- no skirt, no brim
- 2 perimeters, 20% infill rectilinear
- rotate as needed

Assembly
- Ensure to clear up the holes with the drill
- use M3x20 or longer bolts and nuts to assemble it