“The Sitting Secret” – Creepy Ventriloquist Dummy Hueforge

🕯 “The Sitting Secret” – Creepy Ventriloquist Dummy Hueforge 🕯

Step into a haunted parlor in The Sitting Secret, where a dapper but disturbing ventriloquist dummy sits frozen in a shaft of candlelit glow. Dressed in a pinstripe suit with an unsettling grin, the figure is flanked by a grinning jack-o’-lantern and wax-dripped candle—casting long shadows across creaking floorboards and dusty frames.

This highly detailed layered Hueforge STL adds eerie sophistication to your Halloween collection. Designed for AMS or filament swapping, it captures the unnerving charm of vintage horror. A chilling centerpiece for your seasonal display or decorative shelf—subtle in tone but rich in storytelling. A must-have for lovers of the macabre and mysterious!

Project: Ventriloquist Doll.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Kexcelled Orange Transmission Distance: 8
PLA BambuLab Matte Bone White Transmission Distance: 1.6
PLA Sunlu Meta White Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #15 (1.28mm) swap to Bone White
At layer #17 (1.44mm) swap to White for the rest. 

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

This print is part of a coordinated Hueforge series by Manic 3D Prints, designed to showcase a classic Halloween aesthetic using just 4–5 filament colors. Each piece in the collection features rich black, warm pumpkin orange, creamy bone white, and golden autumn tones to create a unified, vintage-inspired display. Mix and match panels for a seamless look across your tiered trays, shelves, or gallery wall this spooky season!

🎃 Halloween  Hueforge: Tales from All Hallows' Eve🎃

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of AI as a tool to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.