1.25 " cheshire eyepiece for telescope - reparable

Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version.

I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed.

The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be reparable. It is possible to use it without crosshairs if needed, as it is a separate body. 

I added a cap to protect it.
If you want to print the piece “capuchon”, please print the V2. The V1 (in gcode, split and non split assembly) is too lose.

I use black PETG for the main body, and white PETG for the reflective part.

The white part is located in rotation thanks to 3 smalls guides, so it will not move. By the way, you can't go wrong while assembling it, thanks to the guides. 
The crosshairs is located in the same way.

For a better handling, i added a fuzzy skin texture in PrusaSlic3r.

You can use this tool to collimate your telescope, weither a Newtonian, a Cassegrain or even a Ritchey-Chretien