OUTDOOR SHOWER HEAD

This is a 3D-printable shower head designed specifically for outdoor showers. It connects via a standard 1/2 inch thread and provides a wide spray area thanks to its 110 mm diameter.

Since the shower head has an impressive diameter of 110 mm, it can work in two modes: open the tap halfway - it pours like a regular watering can; open the tap completely - the effect of "tropical rain" is created (very cool, my favorite).

The model is split into two interlocking halves, which are fastened together using M3 screws and heat-set brass inserts (installed in the bottom part). You can buy it here - https://www.aliexpress.com/item/1005008285787978.html). For a watertight seal, it’s recommended to apply silicone or other waterproof sealant along the joining surfaces before assembly.

Key features:

• Standard 1/2" thread for compatibility with most outdoor shower fittings
• Wide coverage: 110 mm diameter, 44 mm height
• Durable and serviceable two-part construction
• Designed for M3 screws + brass heat inserts
• Optional sealing with waterproof sealant at the joint

Perfect for garden showers, summer cottages, or DIY outdoor plumbing setups. Designed with simplicity and reliability in mind.

I wish you productive work! Post your makes in the comments!