Post Malone Posty Co. Stanley accesories (Temporarily FREE !!)

Here are the best accessories for you new Post Malone Stanley cup tumbler!!!

I have designed lots and lots of name tags for the Stanley cups, and with my wife and daughter being huge Post Malone fans they asked me to make stuff for their new Post Malone cups.

This is designed to fit the 40oz, 20oz and 30oz select the correct file.

The topper fits nice and snugly, will not fall off when taking a drink.

To print this in 2 colors do a filament swap at 3.2mm height, or layer 16 when printing with a 0.2mm layer height.

Print settings

PLA, PETG, ABS, ASA

Layer height 0.2mm

10% Gyroid infill

4 walls

4 bottom layers and 5 top layers.

JUST ADDED coasters!! and .3mf files to make printing easier!!

The coaster base print settings:

0.2mm layer height

3 walls

4 bottom layers, 5 top layers

First color change at layer 5 (1mm height)

Second color change at layer 24 (4.8mm height)

For easier / faster printing you can skip the first color change and only do one at layer 24.

You can also iron the top layers if you like.  I have made so many of these with all kinds of filaments and colors.  Make them unique, make them yours!!

Coaster insert print settings:

0.2mm layer height

3 walls

ZERO top and bottom layers

Spars infill is Honeycomb at 16% (this can be changed to your liking)

The insert is tapered and is best printed with the wider side on the plate.  This is to allow the insert to snap right in.  You can print this however you like to give you the best top finish. 

If you have a special request, or would like a blank plate to add your own name to message me, and i maybe able to make that happen.

This is for personal use and not for resale.  If you would like to sell these, message me for further information.