Magnetic Vise Soft Jaw for 50MM Fork Tube

I originally made this to hold the bottom section of my Kawasaki H1 500 fork tubes. Removing fork seals is annoying, and doing so without marring the aluminum is tough. These clear the brake caliper mounts, and have 6x2mm neodymium magnet inserts. You should be able to press fit the magnets and have them stick to the vise. 

Printed with IEMAI Carbon Fiber PETG AnyCubic Kobra S1, .6 nozzle,5 walls, 25% Infill. Have also tested with 3 walls and seems to work just fine.