July 9, 2025
Description
This modification can be used for the edge guide of the Bosch GKF 18V-8 and GLF 18V-8.
You will need M5x10 screws or thumb screws and short M5 heat-set inserts, like*:
* I do not make any profit with the provided links, just as an example.
| Setting | Value |
|---|---|
| Material | PETG |
| Layer Height | 0.2 mm |
| Layer Width | 0.4 mm |
| Wall Loops | 8 |
| Top Shell Layers | 8 |
| Bottom Shell Layers | 8 |
| Sparse Infill Pattern | Gyroid |
| Sparse Infill Density | 25 % |
License:
Creative Commons — Attribution — Share Alike
9
PrototypeLab
