Cup Holder Pole Mounted

I designed this cup holder specifically for my Rippa R322L mini excavator, but it could be used on any vertical pole that has a 43mm diameter. I've uploaded 2 sizes for the inside diameter of the cup area, the 75mm will fit most cans/bottles, but if you have larger cup or can koozie, the larger size would work better.

You will need:

4) M4X20 hex head bolts

4) M4 threaded heat set inserts (for main cup holder part)

No supports required; print both parts in the upright orientation.

Avoid PLA if this will be used outdoors.

If you like my design and have found it useful, please support my filament addiction- https://www.buymeacoffee.com/skyguy