Ikea Shelf Blanking Peg

Equivalent to an Ikea VARIERA plug, these radically cheaper, as well as being easier to remove. This is a tiny print, so variations in printers can impact the final dimensions. Be sure to print one to test the fit, and adjust scale by +/- 1%, if needed.

Features

• Uses only 0.3g filament!
• Complete in only a few minutes
• Cheap Cheap! Cheap! (Official plugs = $2.99 per 100. Print your own = $0.17 per 100!)
• Extremely forgiving to print
• Flanges ensure stability

Recommended Settings

• Layer Height: 0.20mm 
• Walls: 3
• Infill: 15%
• Material: Any (except maybe TPU)
• Supports: No
• Change Orientation: No
• Brim: Only if you have bed adhesion issues