July 13, 2025
Description
This print should work with any headset with a face interface; it's verified to work with Quest 3, Valve Index, and Bigscreen Beyond without triggering the presence sensor.
It prints in four parts: one Body (the main part), and three Pins that print on their side for optimal strength. Once printed, the Pins are permanently inserted into three corresponding slots on the Base. Make sure to insert these as shown (with the pin facing down as shown in the pictures here), or it will not work, and you will need to print it all again.
The pins take considerable force to insert, and should loudly snap into place when fully inserted. They are not removable.
License:
Creative Commons — Attribution — Noncommercial
Forest Katsch
