January 26, 2026
Description
I made this exhaust housing for my Voron 2.4.
6x Voron M3 inserts (2x for mounting in upper rear holes, and 4x in the front)
4x M3x8 (M3x16mm for the +8mm ver.) screws for mounting the cover
It mounts the same way the original is mounted, using adhesive tape and the 2 screws through the front grill. A 60mm exhaust fan can be mounted directly on the outside. Please carefully secure cables to the strips eyelets to avoid any damage by the fan.
The matching rear wall cable duct and its lower skirt cover can be found here:
www.printables.com/model/1473230-voron-24-and-trident-rear-cable-duct
License:
Creative Commons — Attribution — Noncommercial
7
MrTdesign
