1/43 RC Rocket League Like Stadium

This is a stadium to play Rocket League in real life, with RC 1/43 cars. Cars an ball are not included.

Walls are rounded so car can drive on them, and ball will not be stuck.

I made a video on our first try. We were not experienced but it was fun to play. Game become more challenging with practice, as we develop our accuracy to hit the ball, master some drift to shot the ball with the sliding rear, etc…

BOM:

• Some velcro tape
• 2 or more 1/43 car for example Jiabaile ones are really fine (amazon affiliate link)
• One approx 70mm ball

Instructions:

• use a online service to print a 140x170 vinyl banner with attached image in zip file (commercial banner service are fine). Use the cheapest material, no options. In France i got it for 28€ shipping cost included.
• Cut on white lines
• Print 10 supports, attach flaps with pieces of filament and glue some velcro (see pictures)
• Print 2 set of goals (left & right, 2 bars). You can print them in red and blue for better visual. Attach flaps with pieces of filament and glue Velcro tape.
• Attach some velcro behind the banner (see picture for location)
• Glue some velcro in four edges, on the side of the picture
• Mount goals like in picture, attach them to banner
• Overlap edges a little (with velcro on printed side to the rear of the banner)
• Install all 10 supports

You can fold of roll the banner to store. If you fold it it's more compact but you will have fold that can bother you while playing. Use a hair dryer to gently heat folds to flatten them.

Folded terrain with all accessories, 2 car, 2 remote controller, one ball, take approx 40x35x15cm. So it's relatively compact to store. 

If you roll the field, you will have less fold to sort on installation, but the roll is 140cm long. I thinks it's a better solution for short time storage, like between close sessions.

Let me know if something is unclear. I'll add more explanation.