"The Frame & The Lift" (Part 2/3 of SCROG - System MXG_2) greenhouse enclosure fume hood

If you like what I do here, come visit my Facebook group.

3D printed Grow Tools & Accesories - free .stl



MX_creations proudly presents :

“The Frame” 
- the most powerful replacement for broken corner pieces

"The Lift"
- offers the option to easily adjust the height of a fully tensioned scrog-net

other features:
- made for 16mm original or custom 15x2mm aluminum poles
- every pole is locked inside its fitting with multiple screws
- u can build a heavy-duty double bottom (use it as drain stand or for storage)
- upgrades already in work
- …



What u need:

tools:
- sandpaper k120-240
- metal-cutting saw or a pipe cutter (custom poles only)
- pipe deburring tool (optional, custom poles only)
- grinding fleece (optional, only for polishing, custom poles only)



metal parts:

- screw & nut M3x18 (6pcs for each STIFFENING.stl)
- hex-screw and nut M4x16 (1pcs for each BRAKE.stl

note: u need a lot of m3x18 screws, at least 200+ for a complete tent …sry for this ;)



how to assemble: (some important notes only, pn me if u get in trouble)


the pole-hole(s):

- insert m3 nuts in the inside 
- insert inlay (make sure it fits well)

 the brake:

- pull in M4 hex.screw into KNOB.stl
- use a longer M4 screw to pull in M4 nut to BRAKE.stl

- screw in KNOB.stl (the screw should be flush with the nut)
- insert STAMP.stl into BRAKE.stl



- insert M3 nuts
- insert BRAKE_TPU_INLAY (make sure it fits well)




preparation of poles:

(the rods have a burr at the end, both the original steel rods and the aluminum rods after they've been shortened. It's important for the function that this burr is removed)



- cut your pole
- remove the burr with a pipe deburring tool (optional)
- sand it until there is no remaining burr
- use grinding fleece to make all smooth and shiny




other important things:

- if u have issues while inserting poles like this:



- use POLE_INSERT_HELPER
- press it onto the opening while inserting the pole, u will hear a “klick” if the pole is in place



rod locking:

- while building u have to lock your poles by insertig screws in the backside of STIFFENING.stl
- tighten them not to strong, they will do their work



the lift:

- tightenig the KNOB.stl comlete to keep yor lift in place, tested with 24kg
- ensure the bottom POLE_HOLE has neither nuts nor a inlay inserted 





I hope you will enjoy it & stay green !


most product links are supported by affiliate marketing


If you appreciate my designs and would like to support my work, you can do so by buying me a coffee. Your support means a lot!


This 3D model is the original intellectual property of Andreas Marx and is protected by copyright laws. You are welcome to download and print this model for your own personal use. However, any other activities such as altering the design, selling the model or its prints, or using it for commercial purposes is strictly forbidden without receiving prior written consent from the creator.