Wall Hook

This is a hook you can use to hang whatever you want. you just screw the screws into a stud and then slide the cover/hook on, and you cannot see the screws or under pieces. If your hook breaks just reprint the hook part not the whole thing!! I am working on more hook/covers that you can slide onto the same screw plate that are Stroger and bigger if you have any type of hook, you want created leave a comment or review and I will do my best to make them. Holds around 25 pounds before the hook breaks but I will make ones that can hold way more!!

15% infill

3-5 walls 

No supports orient it, so it does not need them it could affect how smooth the hook slides on and off.

use 6 X 2"screws 

by the way it has offset of .2 which is good for most printers